Видео

Thank you. Glad you like my work. Have you bought any of the products by any chance? :)

Hi, since Neon relies on thin glass tube lines. The Logos always need to be transformed into outlines for the effect to work properly.

Hi, you can simply render them out on a black background. Then simply drag them into any other project. Here you need to set the transfer mode of the footage to add or screen. Instead of the default 'normal", this way the black is cut out and the firework remains.

@@NeuronFX Huh, I didn't think about that :D Thanks!

​@@NeuronFX Can it be exported with a transparent background?

To use the footage all you need to do is drag and drop it into after effects/ premiere pro or any other software and change the transfer mode to Screen or Add. If you are using this in After Effects, the "Real Muzzle FLash Kit" comes with an After Effects scene that has these pre-loaded and pre-set to Add, so you just need to drop your footage. You can have a look at this video here to see how this all work.

Hi, thank you for reaching out. What would you like to do with the presets? as I am not sure if I understood correctly. Would you like to add an IN Animation Marker together with a MID Animation Marker?

Hi, thank you for your question. To add an IN and OUT animation, you can simply add any of the animations that are marker as IN/ OUT animations. Then to add a middle animation just add one of the MIDDLE animations as shown in this video. With regards to MIDDLE animations, these by default would loop throughout the layer's time. If you would like the MIDDLE animation to start and stop at a specific time, you can add a MID Marker from the toolbar. Simply click on the MID button, and this will add a MID marker on your layer. However for this MID Marker to work, you need to toggle on the "Animation at MID Marker" switch from the Effect Controls Panel. So Basically add a MID marker, then turn on "Animation at MID Marker". Now animation will only happen at that marker. The middle Loop duration is used for when you are using the default option of the middle animations, without the Animation at MID Markers turned on. So if you increase this value, the Looping middle animation will take longer (so it will appear slower). That should be all, hope this is of help to you! :)

Hi, thank you for reaching out! For support related queries, you can contact us through the message box available on the bottom right of our profile page, using the account that the item was purchased from. This will activate support from our side, and we will be able to help you out as soon as possible! Many thanks! You can find a link to our profile page here: videohive.net/user/neuronfx

Hi, this is for After Effects CS6 and all the other more recent versions, including CC 2024. It doesn't require any plugins to work, since it uses the native tools within After Effects.

Thank you

Thank you for your notification. It is frustrating to see. We will look through this. At first look, our pack still offers greater value and tools, with features like: Animation at Markers, Stacking of multiple animation presets & continuous offset. (Good thing we encrypted the code!), but I agree many of the animations and the toolbar look copied.

yeah, saw this too. I think it was a rebranded version of megamotion XD

@@myootube Thank you for the notification. Unfortunately that is a copied version.

Hi, it is available for 39$ for the whole toolkit. You can get it from the link provided in the video description.

Hi, thank you for your interest. Yes this would run perfectly on CC2018. If your PC is a bit old, I recommend this toolkit instead of our more recent one, since this would work faster on your system. Let us know should you have any more questions.

Glad that you like it. Character Animation Explainer Toolkit is designed for Adobe After Effects CC and above. It is compatible with After Effects CC Version 12, and all the other more recent versions, including: CC, CC 2014, CC 2015, CC 2016, CC 2017, CC 2018, CC 2019. 16GB Ram should work, normally we recommend 16gb Ram or more to use the toolkit.

Glad you found it useful! :)

Hi, thank you for your comment. With the character animation toolkit you can get started in minutes. It comes with auto lip-syncing plugged in. It also has all the video tutorials, etc to help you use the product and do your first lip-syncing. Of course, if there is anything else you would like to know, let us know!

Thank you for your interest in the product. Sounds and music are not included with the package. The Package contains the visual elements, including Muzzle Flashes, Laser Beams, Bullet hits etc but bot sound elements. Music & Sound Effects are not included with this project file, and they are intended for promotional purpose only. These however can all be found for purchase separately from a separate Music Author, if needed we can provide a link for them, just contact us after purchase.

Hi, we don't have a version of this without the words. In this case I think the easiest way to go about it is to simply leave them blank, export the video and then re-import it in after effects and edit them out by cutting the parts with the text.

Thank you for notifying us about this. I have just updated the link in the description. You can go to this link and scroll slightly down to find the download button: neuronfx.com/megamotion-animation-motion-presets

Hi, this is part of the Character Animation Toolkit for After Effects. You can find a link to this here: 1.envato.market/BYbyx

Thank you! Glad you like it :)

Yes, sure!

Thank you. The presets can be added to your own character. Basically you can use your own character images, put them in a composition and arrange them to be in a standing position as show in this video example. Then add each preset to its corresponding character part. For example Right Hand Walk preset to the image of the right hand. For better results, it is best to parent the Head, and hand images to the torso.

@@NeuronFX Oo thanks. Now it is clear. I will try )

​@@NeuronFX can we use this animation on ai (illustrator)file or only images can be used? I'm trying skating preset on my ai character but whenever I applied left leg animation it's not sticking to the torso/hips although I parent all layer to torso. Guide me

@@rimshaahmed8419 Hi, yes sure. It can be used on all kinds of layers including AI files. Is it possible to send me a quick screen video of the problem please? As this will help to identify any issues and guide you accordingly. You can use this email: stephanzammit@neuronfx.com

Hi, thank you for reaching out to me! In this case make sure to check that the After Effects project is set to JavaScript expression engine? This is dependent on each project so you might open a different project and it can be set to a different expression engine. To change this it is very easy, we have included a video showing how this can be done in the help videos folder. I am also leaving a link to this video here: ruclips.net/video/jHKlQC_dWe0/видео.html Basically, just make sure that this is set to Javascript as after effects won’t be able to read the presets (that use javascript), if this is set to ExtendScript. I hope this is helpful and that you will find the product easy and fun to use! :) Of course, if you have any further problems let me know via email and I will make sure to help you out as soon as possible! You can use this email address: stephanzammit@neuronfx.com When sending me a direct email, just reference your purchase code so we can activate support from our side. :)

Thank you so much

Glad you like it. Try this link see if opens up: 1.envato.market/jvxKb Let us know if you have any problem!

@@NeuronFX Doesn't work either, at least for me. But i already went to envato and looked for your name and downloaded it :D Thanks!

@@NeuronFX Unfortunately i can't really use it because it makes premiere freeze every time i just click it on the timeline. i got a pretty good pc. with nothing else open. any suggestions? :\

@@Straycatxo Hi, when it comes to mogrt files in Premiere Pro, it is important that when you place it in the timeline, you do not touch anything until it fully loads, since Premiere Pro crashes when Mogrt loading is interrupted. With the toolkit, we have also included a light version. I recommend using this version if you are having trouble using the main version.

Same for me, and the export for a 3Mb file never ends

And also, the preview of the effect bugs, I have 32GB ram, a ryzen 5 and an RTX 3080

Hi, if this was purchased from Envato Market, can you please send us a quick message through the message box on the bottom right corner of our profile page, This will activate support from our side so that we may assist you. You can find a link to this here: 1.envato.market/2gvKG

@@stephaz1427 Hi, if this was purchased from Envato Market, can you please send us a quick message through the message box on the bottom right corner of our profile page, This will activate support from our side so that we may assist you. You can find a link to this here: 1.envato.market/2gvKG

Hi, thank you for your comment. I have just changed the title to template tutorial. If you want, we have an other video that shows how to create fireworks natively in After Effects from start to finish, without templates or plugins. You can have a look at it here: ruclips.net/video/MbLiFKLgmfY/видео.html

Hi, we have an other video that shows how to create fireworks natively in After Effects from start to finish. You can have a look at it here: ruclips.net/video/MbLiFKLgmfY/видео.html

Glad this was of help! :)

Hi this is done in Adobe After Effects using an easy to use template. Links in description.

Hi, we have a great introductory discount going on right now! It is available just for a few days until 14th November. You can check the product page in the description for more details.

@@NeuronFX Thank you, purchase completed 😎

@@EmreVural09 That's great. Should you need anything, let us know! :)

Hi, thank you for reaching out to us. This template is for Adobe After Effects, so you will need After Effects installed, then just run this template where you can import your images and export the NFT designs. If you would like to see the product from the inside, and see if this is for you, you can have a look at this video tutorial series that we have done for this toolkit: ruclips.net/video/fx0yG2L66Kk/видео.html

@@NeuronFX Thank you!

Hi, for pre-made fireworks, simply make sure that when you add them to a new composition, the Transfer Mode is set to "ADD" and not "Normal". You will find the Transfer Mode setting, right next to the Layer Name in the composition. By default when you add a new layer, the transfer mode will be set to Normal. Simple click on this dropdown menu (under Mode), and switch this to Add. This will make the background transparent.

Hi this can be easily done in After Effects. Just replace the current text with Happy Birthday. You can have a look at the link in the video description to purchase the template :) We also have a version that works without Trapcode Particular plugin: 1.envato.market/GjVJk6

@@NeuronFX how much cost

@@sowntharyamurugesh4823 Hi, you can find product description and pricing in this link: 1.envato.market/GjVJk6 this specific template costs: $39

@@sowntharyamurugesh4823 You can also get it from envato elements, where you can download unlimited products with one subscription. You can find the link here: 1.envato.market/9WDAG3